Application - D-Link DCS-5220 User Manual

Section 3 - Configuration
A typical application is that when motion is detected, the DCS-5220 Network Camera sends images to a FTP server or
via e-mail as notifications. For example, as seen in the illustration below, an event can be triggered by many sources,
such as motion detection or external digital input devices. When an event is triggered, you can specify what kind of
action will be performed. You can configure the Network Camera to send snapshots or videos to your email address
or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will
know what action shall be performed when a trigger is activated.
D-Link DCS-5220 User Manual

Application

Event Condition
ex.
Motion detection,
Periodically, Digital input,
System reboot
Media
(what to send)
ex.
Snapshot, Video Clips
Action
Server
(where to send)
ex.
Email, FTP
55