D-Link DCS-5220 User Manual page 37

Section 3 - Configuration
Enabling UPnP port forwarding allows the Network Camera to open a secondary HTTP port on the router. You have
to add the secondary HTTP port number behind the Network Camera's public address in order to access the Network
Camera from the Internet. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080,
refer to the list below for the Network Camera's IP address.
If the PPPoE settings are incorrectly configured or the Internet access is not working, restore the Network Camera to
factory default settings.
D-Link DCS-5220 User Manual
From the Internet
http://203.67.124.123:8080
In a local area network
http://192.168.4.160 or
http://192.168.4.160:8080
37