Web-Based Configuration Utility - D-Link DCS-5220 User Manual

Section 3 - Configuration

Web-based Configuration Utility

This section will show you how to configure your new D-Link Network Camera using the Web-based Configuration
Utility.
To access the configuration utility, open a web-browser such as
Internet browser and enter the IP address of your Network Camera
(http://192.168.0.120)
Note: In the example, this address is 192.168.0.120. Your address may differ.
Type Admin in the user name field and leave the password blank
by default.
Note: You may refer to page 64 to change the password for your
admin account.
Click OK
D-Link DCS-5220 User Manual 20