Audio And Video - D-Link DCS-5220 User Manual

Section 3 - Configuration
Settings for two video streams (stream 1 and stream 2) can be configured here. You may configure one setting for
computer display and the other one for mobile display.
Mode:
Select either JPEG or MPEG4. In JPEG mode,
the video frames are independent. However,
MPEG4 consumes much less network bandwidth
than JPEG.
Frame Size:
Select 176 x 144, 352 x 240 or 640 x 480 pixels
for the frame size. We recommend 176 x 144
for mobile viewing and 640 x 480 for a computer
monitor.
Maximum
The minimum frame rate value is 1fps and the
frame rate:
maximum is 30fps. We recommend 30fps for
computer monitors and 5fps for mobile viewing.
Video quality:
This setting limits the maximum refresh frame rate.
To set a fixed bandwidth regardless of the video
quality, select Constant bit rate and the desired
bandwidth. Select Fixed Quality to optimize the
bandwidth utilization and video quality.
Mute:
Select to mute audio.
D-Link DCS-5220 User Manual

Audio and Video

48