Motion Detection - Samsung SNF-8010VM User Manual

motion detection

Events of motion detection can be set to trigger event signal output.
1. From the Setup menu, select the
<event ( )> tab.
2. Click <motion detection>.
3. Set whether or not to <enable>.
4. Set <Sensitivity>, <Size> and <area>.
5. Set whether to use <Detection result
overlay>.
When a motion is detected, its size and
position is marked with a rectangle on
the screen.
• Green : All targets detected as
moving.
6. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 97)
7. When done, click [apply ( )].
English _101