Samsung SNF-8010VM User Manual page 102

setup screen
Motion detection works based on state of the Source View screen of <Video profile>.
J `
When a motion appears in the Source View screen, the alarm goes off, even if no motion occurs
in the Dewarp view.
Before using, set the minimum and maximum motion sizes to suit desired motion range to be
`
detected.
Detected size of an object may have difference with the actual size according to its shape.
`
Up to 16 objects from the top side of the screen can be displayed.
`
In the following cases, effective functioning of motion detection may be degraded or cause
`
improper detection.
-
The object color or brightness is similar to the background.
-
Small activities around the border area of the camera's field of view.
-
Multiple movements continue occurring at random due to a scene change, rapid lighting
changes or other reasons.
-
A fixed object continues moving in the same position.
-
Motions of less position changing such as approaching to the camera or fading away from the
camera.
-
Moving object approaches to the camera too close
-
An object hides other objects behind.
-
Two or more objects overlap or one object divides in multiple portions.
-
Too fast object (for a proper detection, one object should be found overlapping between
contiguous frames).
-
Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.
-
In severe snow, rain, wind or in dawn / dusk.
102_ setup screen