Installation & Connection; Installation - Samsung SNF-8010VM User Manual

installation & connection

inStaLLation

This camera(SNF-8010VM) is waterproof and in compliance with the IP66 spec, but the jack
`
J
connected to the external cable is not. You are recommended to install this product below the
edge of eaves to prevent the cable from being externally exposed.
precautions before installation
Ensure you read out the following instructions before installing the camera:
• Select an installation site that can hold at least 5 times the camera's weight.
• Stuck-in or peeled-off cables can cause damage to the product or a fire.
• For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
Disassembling
1. Using the L-shaped wrench or drill bit provided
with the product, unwind the three nuts in a
clockwise direction to remove the top cover.
Note that it is not necessary to loosen the screws completely.
`
16_ installation & connection