Errors While Scanning; Symbology Parameter Defaults - Motorola DS9208 Product Reference Manual

10 - 2 DS9208 Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 10-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
NOTE See
parameters.
Parameter Defaults
Table 10-1
Disable All Code Types
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Bookland ISBN Format
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
Decode UPC/EAN/JAN Supplemental AIM ID
UPC Reduced Quiet Zone
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Transmit UPC-E1 Check Digit
UPC-A Preamble
UPC-E Preamble
Set Default Parameter on page
Appendix A, Standard Default Parameters
Parameter
4-4.
for all user preferences, hosts, and miscellaneous default
Parameter
Default
Number
1 Enable
2 Enable
12 Disable
4 Enable
3 Enable
83 Disable
576 ISBN-10
16 Ignore
N/A
579
580
80 10
672 Combined
1289 Disable
40 Enable
41 Enable
42 Enable
34 System Character
35 System Character
Page
Number
10-8
10-9
10-9
10-10
10-10
10-11
10-11
10-12
10-14
10-16
10-16
10-17
10-18
10-18
10-18
10-19
10-20
10-21