Gs1 Databar Expanded; Convert Gs1 Databar To Upc/Ean - Motorola DS9208 Product Reference Manual

10 - 80 DS9208 Product Reference Guide

GS1 DataBar Expanded

Parameter # 340
Scan the appropriate bar code below to enable or disable the following code types:
•
GS1 DataBar Expanded
•
GS1 DataBar Expanded Stacked.
*
Enable GS1 DataBar Expanded

Convert GS1 DataBar to UPC/EAN

Parameter # 397
This parameter only applies to GS1 DataBar and GS1 DataBar Limited symbols not decoded as part of a
Composite symbol. Enable this to strip the leading '010' from DataBar and DataBar Limited symbols encoding
a single zero as the first digit, and report the bar code as EAN-13.
For bar codes beginning with two or more zeros but not six zeros, this parameter strips the leading '0100' and
reports the bar code as UPC-A. The UPC-A Preamble parameter that transmits the system character and
country code applies to converted bar codes. Note that neither the system character nor the check digit can be
stripped.
Enable Convert GS1 DataBar to UPC/EAN
(1)
(1)
Disable GS1 DataBar Expanded
(0)
*
Disable Convert GS1 DataBar to UPC/EAN
(0)