Maintenance & Care; Emptying The Dirt Container - Bissell Powerglide 1645 Series User Manual

Maintenance:
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
Press
Release
Button
Maintenance:
1
Press Empty
Button
and pull
away from
vacuum.
Twist top
right to
separate.
4
With dirt container removed,
press red release button to
access post-motor filter.
Clean all filters with mild
detergent, rinse, and squeeze all
excess water. Allow filters to dry
completely before reinserting.
www.BISSELL.com
8

Emptying the Dirt Container

Press Empty
Button
Pull handle
Pull
to push Dirt
Container away
from vacuum
Cleaning the Dirt Container & Filters
2
Press
Twist
Rinse and dry all sections
of dirt container with
paper towel.
5
Post-Motor
Filter
Place dry pre-motor filters back
on top of dirt container with
black tabbed side on top. Place
post-motor filter back to bottom
front of vacuum and snap filter
cover door back on.
2
Holding Dirt Container over a trash bin,
press Release Button on back.
Snap bottom back into place
3
Remove pre-motor filters
and check for dirt on BOTH
sides. Separator Screen can
be rinsed and dried as well.
Pre-Motor
Filters
Checked pattern
when filter bottom
is dirty
Press to Release
Pre-Motor
Filters
Separator
Screen
Checked pattern
when filter bottom
is dirty
6
When reassem-
bling, place top
tank piece last
and twist left.