Assembly - Bissell Powerglide 1645 Series User Manual

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
Snap
TurboBrush®
tool and clip
onto wand.
3
Snap lower cord wrap to lower back
of unit. Attach extra reach hose to
back of unit. Wrap power cord.
NOTE: Turn off the PowerBrush when vacuuming hard surfaces, such as hard
wood or tiled floors, as well as when cleaning smaller rugs that may be caught by
the rotating brush.
NOTE: The Crevice Tool is stored inside the Extra Reach Stair Hose. Remove
the tool when the hose is in use and replace it inside the hose when ready to
store the Extra Reach Hose.
2
4
Extra
Reach
Hose
Plug into a polarized outlet
Recline vacuum and press Power Button
(O – OFF and l – ON)
"Click"
Insert Upper Handle
into Base, holding down
Height Adjustment
Lever until click sound
is heard.
www.BISSELL.com
PowerBrush
ON / OFF
Power
ON / OFF
5