Table of Contents
Advertisement
The motherboard comes with two Double Data Rate (DDR) Dual Inline Memory
Module (DIMM) sockets. These sockets support up to 2GB system memory using
184-pin unbuffered non-ECC PC2700/PC2100 (FSB533) or PC2100/PC1600
(FSB400) DDR DIMMs.
The following figure illustrates the location of the DDR DIMM sockets.
®
P4GE-VM
P4GE-VM 184-Pin DDR DIMM Sockets
This motherboard supports different memory frequencies depending on the CPU
FSB (Front Side Bus) and the type of DDR DIMM.
CPU FSB
533 MHz
400 MHz
Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.
Follow these steps to install a DIMM.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly
seated.
ASUS P4GE-VM motherboard user guide
DDR DIMM Type
PC2700
PC2100
PC2100
PC1600
Unlocked Retaining Clip
80 Pins
104 Pins
Memory Frequency
333 MHz
266 MHz
266 MHz
200 MHz
DDR DIMM notch
1-11
Advertisement
Table of Contents
