Motherboard Components; Placement Direction; Screw Holes - Asus Motherboard P4GE-VM User Manual

Motherboard p4ge-vm motherboard user guide
Hide thumbs Also See for Motherboard P4GE-VM:
Table of Contents

Advertisement

Before you install the motherboard, study the configuration of your chassis to
ensure that the motherboard fits into it. The motherboard uses the micro-ATX form
factor that measures 9.6 inches x 8.6 inches (24.5 cm x 21.9 cm).
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause you physical injury and damage

motherboard components.

1.6.1 Placement direction

When installing the motherboard, make sure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.

1.6.2 Screw holes

Place six (6) screws into the holes indicated by circles to secure the motherboard
to the chassis.
Do not overtighten the screws! Doing so may damage the motherboard.
Place this side towards
the rear of the chassis
1-8
Chapter 1: Product introduction

Advertisement

Table of Contents
loading

Table of Contents