Trouble Shooting; What To Do, If; Test And Fault Messages - Miele NOVOTRONIC T 7634 Operating Instructions Manual

What to do, if . . . ?

You can remedy most problems yourself. In many cases you can save time and
expense, since you will not have to call in customer service.
The following tips should help you locate and remedy the cause of a problem.
Please note the following:
,
Repairs to electrical appliances should only be carried out by qualified
professionals. Work performed by unqualified persons can place the user at
considerable risk.

Test and fault messages.

Problem
Cancelling a program
0 and End appear in
the display
The buzzer sounds.
0-§ appears in the
display.
Gentle indicator light
flashes.
Cancelling a program
The buzzer sounds.
Flashing display may
show Cold air or End.
Cause
This is not a fault.
The electronics recognizes
that there is no laundry in
the drum and cancels the
program.
Drying of single or already
dried laundry items can
also lead to program
cancellation.
The lock function has been
activated.
The cause is not immedi-
ately obvious.

Trouble shooting

Solution
In future, dry individual
laundry items with the
Timed warm program.
Cancelling test message:
– Open and close door
If you wish to dry, you must
disable the lock function
(see "Electronic lock
function").
– Switch the dryer off and
then on again.
– Start a program.
If program interruption and
error message occur, a
fault is present. Contact
Miele customer service.
23