Adjusting Buzzer Volume - Miele NOVOTRONIC T 7634 Operating Instructions Manual

Programmable functions

Adjusting buzzer volume

The buzzer has two volumes.
For programming and saving in
memory, follow steps
This function is programmed using the
buttons.
Precondition:
– The dryer is switched off.
– The door is closed.
Press Start/Stop and keep it pressed
it during steps
Press the I-On/0-Off button in.
Wait until the Start/Stop button lights up
continuously . . .
. . . then release the Start/Stop
button.
Press the Gentle button once.
– The Gentle indicator light flashes
briefly four times.
– P and 0 flash alternatingly in the
display (default setting).
46
to .
- .
The number appearing alternatingly
with P means:
0 Buzzer normal
(default setting)
I Buzzer loud
(Express indicator light also flashes)
Pressing the Start/Stop button
switches from one number to the
other, and you simultaneously hear
the buzzer setting.
Using the I-On/0-Off button, switch
the dryer off.
The programming is now stored in
memory. You can change it again at
any time.