Panasonic WJ-SX650 Series Operating Instructions Manual page 64

G Sequence Setting
Sequence setting is performed in "Sequence" of WJ-SX650 Series Administrator Console. The following settings are available
for each sequence step.
Setting item
LCN (Logical Camera Number)
Preset
AUX1/2
Dwell
Note: Preset and AUX1/2 will not be activated for cameras selected by operators with higher priority or restricted by the cam-
era access setting
64
Parameter
1 to 999
1 to 256
ON, OFF, - -
1 to 30 sec
Remarks
Camera position numbers are also avail-
able for parameters. (CAM-P)
–
Dwell time to display each camera
image
(Group preset has no sequence steps,
and Dwell setting is not available.)