Panasonic WJ-SX650 Series Operating Instructions Manual page 40

<To perform settings in SETUP MENU>
VD2/DATA/CABLE COMPENSATION (Refer to p. 54.)
5. Perform the RS-485 camera settings.
CAM001 to 150: If you use RS-485 cameras, select
desired parameters for the RS-485 (CAMERA) ports
and camera unit numbers.
<To perform settings in WJ-SX650 Series Administrator
Console>
"System" – "VD2/DATA/Cable Comp." – "RS485 Camera"
<To perform settings in SETUP MENU>
RS485 CAMERA (Refer to p. 54.)
6. Perform the settings of cameras supplying video input
signal to recorders.
<Recorder 1 to 10>
Recorder – LCN Setting (CAM 1 to 16): Set the LCN's
of camera input connectors used for the loop-thru
connections between the recorders and the unit. (In
this example, maintain the factory default.)
Note: Change these parameters when you have
changed the LCN settings in Step 3 or loop-thru
connections. (Refer to p. 31.)
<To perform settings in WJ-SX650 Series Administrator
Console>
"System" – "Recorder" – "LCN Setting"
<To perform settings in SETUP MENU>
Not available
7. Perform the camera title settings.
CAM001 to 160: Enter desired camera titles.
<To perform settings in WJ-SX650 Series Administrator
Console>
"Camera" – "Camera Title"
<To perform settings in SETUP MENU>
Not available
8. Set the current time and date.
<To perform settings in WJ-SX650 Series Administrator
Console>
"Display" – "Display"
<To perform settings in SETUP MENU>
TIME&DATE (Refer to p. 50.)
40