Installation Checklist - Asko D5534XLFI Installation Instructions Manual

INSTALLATION CHECKLIST

ASKO - DISHWASHER
Appliance Installation Checklist
• Remove packaging and check for cosmetic damages.
• Remove the information packets from inside the dishwasher.
• Attach any accessories as required by the installation. Fill strips, light shielding
film, supplied door sealing, accessory door, custom panel...
• Attach the drain line using the largest section of the disposer boot allowable.
Leave the high loop in place.
• Attach the PEX fill hose. Don't forget to use the O-ring.
• Plug the dishwasher into the wall.
• Turn on the water and check the fill line connections for leaks.
• Slide the unit into the cabinet and level the machine front to rear, and left to right.
• Mount the unit to the cabinet.
Turn the power to the unit on and start a cycle. Make sure there are no drain
•
leaks.
• Show the customer their warranty card, and help them locate the model and
serial number on the unit.
• Leave all user books for consumer.
Page 20
461326 Install DW90 FI USA EN Rev 01.indd 20
Customer Care Center
1-800-898-1879
www.askona.com
Art. No 461326 Rev. 01
2014-01-16 10:51:55