Step 5. Checking Dishwasher Function And Fit; Step 6. Securing The Dishwasher - Asko D5534XLFI Installation Instructions Manual

STEP 5. CHECKING DISHWASHER FUNCTION AND FIT

Test the dishwasher with the Rinse & Hold program.
Check that the dishwasher fills and drains properly.
Also check that none of the connections leak.
Also check that adjacent drawers and cabinet
doors can be opened when the dishwasher door
is open.

STEP 6. SECURING THE DISHWASHER

1. Pull out the upper basket, and the center basket
if present, and turn the basket stop on the runner
outward.
2. To make more space available when installing the
machine, remove the upper and center basket if
present.
3. Remove the lower basket. Otherwise it easily rolls
out if you need to adjust the dishwasher during
installation.
4. Screw the dishwasher to the counter from the inside
or to the cabinets on either side. If the counter
is a hard material, such as marble, screw the
dishwasher to the side cabinets. Use the supplied
plastic spacers when mounting the dishwasher
into place!
NOTE:
When it is not possible to attach the dishwasher
to the cabinet or the underside of the counter
top, you should install tip guards to prevent the
machine from tipping when you open the door.
Sold individually.
461326 Install DW90 FI USA EN Rev 01.indd 15
Tip Guards
(P/N 8070851)
Customer Care Center
www.askona.com
Alt. 1
7
6
1-800-898-1879
Alt. 2
6
7
Page 15
2014-01-16 10:51:45