Table of Contents
Advertisement
Quick Links
Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfil your needs for many years to come.
Scandinavian design combines clean lines, everyday functionality and high quality. These
are key characteristics of all our products and the reason they are greatly appreciated
throughout the world.
To get the most from your new dishwasher, we recommend that you read the
operating instructions before using the dishwasher. The operating instructions also
include information on how you can help protect the environment.
Operating Instructions
Dishwasher
ASKO D5532 FI
Advertisement
Table of Contents
Related Manuals for Asko D5532 FI
Summary of Contents for Asko D5532 FI
- Page 1 Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
-
Page 2: Table Of Contents
CONTENTS FRONT PANEL TROUBLESHOOTING SAFETY INSTRUCTIONS TECHNICAL INFORMATION BEFORE WASHING FOR THE FIRST TIME INSTALLATION LOADING THE DISHWASHER SERVICE USING THE DISHWASHER PROGRAM CHART SETTINGS YOUR NOTES CARE AND CLEANING FRONT PANEL The panel is fitted with touch buttons with audible feedback (see the chapter Settings). On/Left-on mode Rinse aid indicator Delayed start... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS GENERAL WARNING! Read the operating instructions and keep them in a safe place! Dishwasher detergents are strongly alkaline. They can be Never use the dishwasher for any purpose other than that extremely dangerous if swallowed. Avoid contact with skin and specified in these operating instructions. -
Page 4: Before Washing For The First Time
BEFORE WASHING FOR THE FIRST TIME LOADING THE DISHWASHER CHECKING WATER HARDNESS ECONOMIC DISHWASHING Contact the local water utility to check the water hardness in your Run programs only with a full load area. This is important with regard to how much detergent and Wait to run a program until the dishwasher is full. - Page 5 Wood Wooden items should only be washed in a dishwasher if marked dishwasher safe. Aluminium Aluminium can lose its shine if washed in a dishwasher. However, good quality aluminium pans can be washed in a dishwasher, even if some of the shine will be lost. Plastic items Avoid washing plastic items that cannot withstand high temperatures.
-
Page 6: Using The Dishwasher
USING THE DISHWASHER ADD DETERGENT Positioning of cutlery basket lid (in upper basket) The cutlery basket lid can be removed and used, for example, as an extra cutlery basket in the upper basket (see below). 1 Prewash detergent compartment 2 Main wash detergent compartment Detergent is added according to water hardness. -
Page 7: Program Symbol
PROGRAM SELECTION Press the Program selector one or more times until the desired Rinse & Hold program symbol appears on the display. Used to rinse dishes while you wait for the dishwasher to become fully loaded. Heavy SELECTING OPTIONS Program for very dirty dishes, such as pans, casserole dishes and To select an option, press one of the option buttons. - Page 8 STOPPING OR CHANGING A PROGRAM NOTE! If you want to change program after starting the dishwasher, open Remember to press the Start/Stop button to start the program. the door then press and hold Start/Stop for three seconds. Add more detergent if the lid of the detergent dispenser has opened. START THE DISHWASHER Then choose a new program, press Start/Stop and close the door.
-
Page 9: Settings
SETTINGS DO AS FOLLOWS TO OPEN THE SETTINGS MENU: First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the button. Press and hold the On/Left-on mode button until the display lights up. Within five seconds, press and hold the Program selector and the Long dry button. - Page 10 Button press Options Settings Description Operation volume This sound is used to confirm each button press. (Off) (Low) (High) Press Start/Stop to save the setting value and continue to the next setting. LCD contrast For adjusting the contrast of the display on the panel. (Low) (High) Press Start/Stop to save the setting value and continue to the next setting.
-
Page 11: Care And Cleaning
CARE AND CLEANING COARSE FILTER NOTE! The coarse filter traps larger food particles, which cannot get past The dishwasher must not be used without the filter in place! the drainage pump. Empty the coarse filter as necessary. Diswashing efficiency can be affected if the course filter is 1 Lift the coarse filter by the handle. - Page 12 2 Remove any debris using a needle or the like. The spray arms DOOR also have holes underneath. When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary). WARNING! Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components.
-
Page 13: Troubleshooting
TROUBLESHOOTING Display Type of fault Action Overfilling Call the service division. Water outlet fault See "Water remains in the dishwasher" in the table below. Water inlet fault Check that the water tap is on. Check whether dishwasher inlet hose is connected to a pressure limiting valve (some pressure limiting valves may restrict the supply of water to the dishwasher). - Page 14 Problem Possible causes Action Rattling sound when dishwashing. The dishes are not correctly placed or the Check that the dishes are placed securely. Spin spray arms are not rotating. the spray arms to make sure they can rotate. The dishwasher does not start. The Start/Stop start button has not been Press and hold Start/Stop until the display pressed for long enough.
- Page 15 Problem Possible causes Action The touch buttons do not react when pressed. You have pressed the touch buttons too soon Wait a moment then try again. after opening the door. Dirt on the touch buttons. Clean with a dry or slightly damp cloth. Open the door until the display lights up.
-
Page 16: Technical Information
TECHNICAL INFORMATION INFORMATION FOR TEST INSTITUTE Energy labelling Australian standard: AS/NZS 2007 Number of place settings: Dishwashing programs: Normal, no options The door should be opened upon completion of the drying cycle a distance of 35 mm at V. Program time: 2:00 hours:minutes Connection: Cold water 20 °C... - Page 17 TECHNICAL DATA Height: 817-872 mm Width: 596 mm Depth: 550 mm Weight: 49 kg Capacity: 14 place settings Water pressure: 300 - 1000 kPa 0.3–10 kp/cm 3–100 N/cm Electrical connection: See type plate. Rated power: See type plate. Weight can vary due to different specifications. In accordance with standard, AS/NZS 2007.
-
Page 18: Installation
INSTALLATION 1189 [mm] 30-94 *Remove locking nuts for an installed height of 820-821 mm. **Door length. It is important that you read through and follow the instructions WARNING! and directions below. Conduct installation and connection in accordance with the separate installation instructions. The plug must be disconnected or power to the socket turned off while the work is carried out! SAFETY INSTRUCTIONS... -
Page 19: Service
SERVICE The hose must always discharge at least 350 mm above the bottom Read the chapter Troubleshooting before contacting the service of the machine. division. Make a note of the information on the serial number plate on the right inside the dishwasher. Note the type number (1) and Ensure that the drainage hose has no kinks. -
Page 20: Program Chart
PROGRAM CHART... -
Page 21: Your Notes
YOUR NOTES... - Page 22 YOUR NOTES...
- Page 23 YOUR NOTES...
- Page 24 Close and reopen the door, or press the On/Left-on mode button, to reactivate the panel. PRESS AND HOLD START/STOP FOR TWO SECONDS AND CLOSE THE DOOR (SEE PAGE 8) www.asko.com Art. No.: 8095505. Rev. 01. We reserve the right to make changes.