Haier HB21FWRSS Service Manual page 13

DISASSEMBLY
14. Place the refrigerator without turning on the power.
After the refrigerator is placed at a flat position and cleaned, don¡¯t turn on the
power immediately, rather you should place the refrigerator for about 6 hours
without turning on the power. After at least 6 hours, turn on the power so that the
refrigerator can operate well.
15. Replacing the Light Bulb(refrigerator)
Bulb specifications: 220V~, 25W
Socket: E14 (DO NOT use a bulb over 25W)
Unplug the appliance.
To remove the light shield, press the stopper
at rear out of the square hole.
Pull the shield backward until the retainer is
separated from the square hole.
Turn the bulb anticlockwise and out. Replace a
bulb of the same specifications in the reverse
sequence of removal.
To replace the light shield: Engaged the retainer
into the square hole and then press the shield
rear forward until the stopper is locked in the
square hole.
Square
hole
Refrigerator
light socket
Retainer
Stopper
Light bulb