Haier HB21FWRSS Service Manual page 11

DISASSEMBLY
5. Dismantle all subassemblies
The foam base seat as well as the
adhesive ape as a fixed additional
part must bealso dismantled.
7. Place the refrigerator at
a proper position
See the previous ¡°Position Environment¡±
For the convenience of searching information, the number of the refrigerator and the
number of manufacturing should be copied on the guarantee issue.
Note
9. Height-adjustable Shelf
The height of shelf can be adjusted to meet your storage needs.
To adjust the shelf height, remove the shelf first. The steps are as follows:
tilt the shelf up at front, and lift it up and out of tracks. To replace the shelf, with shelf front
raised slightly, engage the lugs in tracks. Then lower shelf front until it locks into position.
6. Check all the additional parts and
materials with the machine.
The articles in the box must be checked according
to the descriptions on the incasement list, and if
there is any difference between the description on
the incasement list and the actual case, please
consult the seller shop for information.
8.The installment of the decorating
articles at the base.
Open the door of the refrigerant room and from the
refrigerant room take out the decorating articles and
install them at the proper positions, and drill the bolts
Lift and remove
Tilt up
To remove
Engaged the lugs
To replace