Upgrade Firmware - LevelOne WCS-2040 User Manual

Upload daylight saving time rule: Click Browse... and specify the XML fi le to upload.
If the incorrect date and time are assigned, you will see the following warning message when uploading
the fi le to the Network Camera.
The following message is displayed when attempting to upload an incorrect fi le format.
Export language file: Click to export language strings. LevelOne provides nine languages: English,
Deutsch, Español, Français, Italiano, 日本語, Português, 簡体中文, and 繁體中文 .
Upload custom language fi le: Click Browse... and specify your own custom language fi le to upload.
Export setting backup fi le: Click to export all parameters for the device and user-defi ned scripts.
Upload setting backup fi le: Click Browse... to upload a setting backup fi le. Please note that the model
and fi rmware version of the device should be the same as the setting backup fi le. If you have set up a
fi xed IP or other special settings for your device, it is not suggested to upload a settings backup fi le.

Upgrade Firmware

This feature allows you to upgrade the firmware of your Network Camera. It takes a few minutes to
complete the process.
Note: Do do not power off the Network Camera during the upgrade!
Follow the steps below to upgrade the fi rmware:
1. Download the latest fi rmware fi le from the LevelOne website. The fi le is in .pkg fi le format.
2. Click Browse... and specify the fi rmware fi le.
3. Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade
completes.
If the upgrade is successful, you will see "Reboot system now!! This connection will close". After that, re-
access the Network Camera.
User's Manual - 97