LevelOne WCS-2040 User Manual page 6

Hide thumbs Also See for WCS-2040:

Table of Contents

Hardware Reset

The reset button is used to reset the system or restore the factory default settings. Sometimes

resetting the system can return the camera to normal operation. If the system problems remain

after rebooting, restore the factory settings and install again.

Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the

Network Camera to reboot.

Restore: Press and hold the recessed reset button until the status LED rapidly blinks red and

green simultaneously. Note that all settings will be restored to factory default.

6 - User's Manual

Table of Contents

Fcs-1040