Using 3Gpp-Compatible Mobile Devices - LevelOne WCS-2040 User Manual

Hide thumbs Also See for WCS-2040:
Table of Contents

Advertisement

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet. For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable.
For more information, please refer to RTSP Streaming on page 41.
2. As the the bandwidth on 3G networks is limited, larger video sizes are not available. Please
set the video and audio streaming parameters as listed below.
For more information, please refer to Audio and Video on page 51.
3. As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554. For more information, please refer to RTSP Streaming on page 41.
4. Launch the players on 3GPP-compatible mobile devices (ex. Real Player).
5. Type the following URL commands in the player.
The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
access name for stream1 or stream2>.
For example:
User's Manual - 27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fcs-1040

Table of Contents