LevelOne WCS-2040 User Manual page 21

Multiple devices information
Firmware Information
The selected firmware information will show the information about the file that you selected.
Firmware version: The version number of the selected firmware.
Select Firmware
You can use the "Select firmware" button to browse the file that you want upgrade onto the se-
lected device(s). After selected the file, Installation Wizard will check whether the file you select-
ed is correct. If it's the correct version, then the package information will display the information
about the file and enable the "Start Upgrade" button. Therefore you can click on the button to
upgrade the firmware. If not, then it will be a pop-up warning message.
Select firmware
User's Manual - 21