LevelOne WCS-2040 User Manual page 83

Server Settings
Click Add Server on Event Settings page to open the Server Setting page. On this page, you can specify
where the notifi cation messages are sent when a trigger is activated. A total of 5 server settings can be
confi gured.
Server name: Enter a name for the server setting.
Server Type
There are four choices of server types available: Email, FTP, HTTP, and Network storage. Select the item
to display the detailed confi guration options. You can confi gure either one or all of them.
Email: Select to send the media fi les via email when a trigger is activated.
■ Sender email address: Enter the email address of the sender.
■ Recipient email address: Enter the email address of the recipient.
■ Server address: Enter the domain name or IP address of the email server.
■ User name: Enter the user name of the email account if necessary.
■ Password: Enter the password of the email account if necessary.
■ Server port: The default mail server port is set to 25. You can also manually set another port.
If your SMTP server requires a secure connection (SSL), check This server requires a secure
connection (SSL).
To verify if the email settings are correctly confi gured, click Test. The result will be shown in a pop-up
window. If successful, you will also receive an email indicating the result.
Click Save to enable the settings, then click Close to exit the page.
User's Manual - 83