Onkyo TX-SR444 Basic Manual page 44

Setting Item Default Value
Audio TV Out Off
Audio Return Auto
Channel
Auto LipSync On
En-24
Setting Details
You can enjoy audio through the speakers of the
HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
● If you select "On", set "HDMI CEC (RIHD)"
to "Off."
● The setting is fixed to "Auto" if "HDMI CEC
(RIHD)" is set to "On".
● Listening mode cannot be changed while
"Audio TV Out" is set to "On" and audio is
being output through the speakers of the TV.
● Depending on your TV set or input signal of
the component, audio may not output through
the speakers of the TV even if this setting
is set to "On". In such case, audio is output
from the speakers of the unit.
● If you operate the MASTER VOLUME control
on the main unit when "Audio TV Out" or
"HDMI CEC (RIHD)" is "On" and audio is
output from the TV speakers, audio will be
output from the unit. If you do not want to
output audio from the unit, change the unit or
TV settings, or reduce the volume of the unit.
You can enjoy sound of the HDMI connected
ARC compatible TV through the speakers
connected to the unit. To use this function, set
"HDMI CEC (RIHD)" to "On" in advance.
"Auto": When enjoying the TV sound through the
speakers connected to the unit
"Off": When not using the ARC function
This setting automatically corrects any
desynchronization between the video and audio
signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled.
"Off": Automatic correction will be disabled.
Power Management
Setting Item Default Value
Sleep Timer Off
Auto Standby On/Off
Auto Standby in Off
HDMI Standby
Through
Power Out at Off
Standby for STRM
BOX
Bluetooth
Setting Item Default Value
Bluetooth On
Advanced Settings (Setup Menu)
Setting Details
Allows the unit to enter standby automatically
when the specified time elapses. Select a value
between "10 min" to "90 min".
"Off": Does not turn the unit to standby
automatically.
This setting places the unit on standby
automatically after 20 minutes of inactivity
without any video or audio input.
"On": The unit will automatically enter standby
mode ("ASb" will light).
"Off": The unit will not automatically enter
standby mode.
● "Auto Standby" is appeared on the display
and TV screen 30 seconds before the Auto
Standby comes on.
● Default values vary depending on the
regions.
Enable or disable "Auto Standby" while "HDMI
Standby Through" is on.
"On": The setting will be enabled.
"Off": The setting will be disabled.
● This setting cannot be set to "On" if "Auto
Standby" is set to "Off".
Devices connected to the USB port are
supplied with electricity even when this unit is
in standby mode when this function is "On".
● Power consumption in standby mode may
increase when this function is being used.
Setting Details
Select whether or not to use the Bluetooth
function.
"On": Enables connection with a Bluetooth-
enabled device by using the Bluetooth function.
Select "On" also when making various Bluetooth
settings.
"Off": When not using the Bluetooth function