Onkyo TX-SR444 Basic Manual page 39

Setting Item Default Value Setting Details
Double Bass On This can be selected only when "Configuration"
- "Subwoofer" is set to "Yes" and "Front" is set to
"Large".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off": Bass output will not be boosted.
Distance
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Setting Item Default Value
Unit feet/meters
Front Left 12.0ft/3.60m
Center 12.0ft/3.60m
Front Right 12.0ft/3.60m
Height Left 9.0ft/2.70m
Height Right 9.0ft/2.70m
Surround Right 7.0ft/2.10m
● The setting will not automatically be configured
even if you performed the automatic speaker
setup.
Setting Details
Specify the unit of distance for configuring
settings.
"feet": When setting in feet (0.1ft to 30.0ft, in
increments of 0.1ft)
"meters": When setting in meters (0.03m to
9.00m, in increments of 0.03m)
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Specify the distance between each speaker and
the listening position.
Setting Item Default Value
Back Right 7.0ft/2.10m
Back Left 7.0ft/2.10m
Surround Left 7.0ft/2.10m
Subwoofer 12.0ft/3.60m
● Default values vary depending on the regions.
● The speaker "Distance" may be unable to be changed depending on the settings in "Configuration" -
"Speaker Channels" / "Subwoofer".
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item Default Value
Front Left 0dB
Center 0dB
Front Right 0dB
Height Left 0dB
Height Right 0dB
Advanced Settings (Setup Menu)
Setting Details
Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Setting Details
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
● The setting cannot be changed during ZONE
B playback.
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
● The setting cannot be changed during ZONE
B playback.
En-19