Table of Contents
Advertisement
QUICK GUIDE TO SYSTEM FUNCTIONS
Function
Procedure
Check Zones
Press [ ]
Arm System
Enter code
Press arming key desired
(AWAY, STAY, INSTANT,
MAXIMUM)
Disarm System
Enter code
Press OFF [1]
Bypass zones
Enter code
Press BYPASS [6]
Enter zone numbers to be
bypassed (use 2-digit entries)
Chime Mode ON
Enter code
Press CHIME [9]
Chime Mode OFF
Enter code
Press CHIME [9]
Test Mode ON
Enter code
Press TEST [5]
Test Mode OFF
Enter code
Press OFF [1]
Comments
Do this to view faulted zones when system not ready.
Do this to arm the system in the mode selected.
Do this to disarm the system and silence alarms.
Do this to bypass protection zones. Bypassed zones are un-
protected and will not cause an alarm if violated.
Do this to turn on chime mode. Keypad will sound if (selected)
doors or windows are opened while system disarmed.
Do this to turn chime mode off.
Do this to enter test mode. Sounds alarm sounder and allows
sensors to be tested.
Do this to turn test mode off. System returns to normal mode.
– 34 –
(Continued)
Advertisement
Table of Contents
