Arming Perimeter Only (Instant) - ADEMCO VISTA-20SEA User Manual

3-partition
Table of Contents

Advertisement

Use this key when you are staying home and do not expect anyone to use the entrance door.
Using the
7
INSTANT Key
When armed in INSTANT mode, the system will sound an alarm if a protected door or window
is opened, but you may otherwise move freely throughout the premises. The alarm will also
sound immediately if anyone opens the entrance door.
Close all protected perimeter windows and non-main exit doors before arming (see
Note:
CHECKING FOR OPEN ZONES section).
Failure to close an
open exit route zone
before the exit delay
1.
time ends may result in
that zone being auto-
matically bypassed at
that time
2.
You can restart the exit delay at any time after arming in the INSTANT mode by pressing the
the system. This avoids having to disarm the system and then arm it again.
ARMING PERIMETER ONLY
(With Entry Delay OFF)
INSTANT
+
7
(Security Code)
ARME D INST ANT
key. This is useful if you wish to open the entry/exit door to let someone in after arming
ENTER SECURITY CODE THEN PRESS INSTANT
Example: 7
2
9
LISTEN FOR 3 BEEPS
The keypad will beep three times and will display the armed
INSTANT message. The red ARMED indicator also lights.
– 14 –
6
then press the INSTANT key
.

Advertisement

Table of Contents
loading

Table of Contents