Arming All Protection (Maximum) - ADEMCO VISTA-20SEA User Manual

3-partition
Table of Contents

Advertisement

Use this key when the premises will be vacant for extended periods of time such as vacations,
Using the
4
etc., or when no one will be moving through protected interior areas.
MAXIMUM Key
When armed in MAXIMUM mode, the system will sound an alarm if a protected door or window
is opened, or if any movement is detected inside the premises. You may leave through the
entrance door during the exit delay period without causing an alarm, but an alarm will be
NOTE:
Failure to close an
sounded as soon as someone re-enters.
open exit route zone
Close all protected perimeter windows and non-main exit doors before arming (see
before the exit delay
CHECKING FOR OPEN ZONES section).
time ends may result in
that zone being auto-
matically bypassed at
1.
that time
2.
ARMING ALL PROTECTION
(With Entry Delay OFF)
MAXIMUM
+
4
(Security Code)
ARME D MAXIMUM
YOU MAY E XIT NOW
ENTER SECURITY CODE THEN PRESS MAXIMUM
Example: 7
2
9
LISTEN
The keypad will beep twice, or beep continuously if exit
warning has been programmed for your system, and will
display the armed MAXIMUM message (AWAY/INSTANT on
fixed-word keypads). The red ARMED indicator also lights.
The "You May Exit Now" portion of the message disappears
when the exit delay expires.
– 16 –
6
then press the MAXIMUM key.

Advertisement

Table of Contents
loading

Table of Contents