Table of Contents
Advertisement
CHECKING FOR OPEN ZONES
Using the
Before arming your system, all protected doors, windows and other protection zones not on the
exit route must be closed or bypassed (see BYPASSING section). Otherwise the keypad will
READY Key
display a "Not Ready" message.
Note: A green READY indicator on the keypad will be lit if all protection zones in the system
are secure. If not lit, the system can only be armed if the zones that are NOT READY are on
the exit route.
TO SHOW FAULTS
To show faulted zones:
READY
1.
2.
F AULT 05 F RONT
UPST AIRS BE DROOM
3.
DISARMED - PRESS
Using the READY key will display all zones that are faulted,
making it easier for you to secure any open zones.
PRESS THE READY KEY
Do not enter security code, but simply press the READY key.
SECURE FAULTED ZONES
Typical fault display shows open zones. Secure or bypass the
non-exit route zones displayed before arming the system.
SYSTEM CAN BE ARMED
DISARME D
The "Ready" message will be displayed when all protection
RE ADY T O ARM
zones have been either closed or bypassed.
You may now arm the system as usual if the zones that are NOT
READY are on the exit routes.
– 12 –
Advertisement
Table of Contents
