Table of Contents
Advertisement
To Add a User or
Important: Temporary users of the system (e.g., babysitters, cleaning staff, etc.) should not be
Change a User's
shown how to use any system function they do not need to know, such as bypassing protection
Code
zones for example.
Sequential key depressions for all steps in a procedure must be made within 2 seconds of one
another, or else the entire entry is aborted and must be repeated from its beginning (e.g.,
perform steps 1, 2, and 3 below with no delay between steps).
Changing the
1.
Master Code
Follow the procedure for
changing a user's code,
but enter user #02. You
2.
will be prompted to enter
the new code a second
time to confirm
accuracy.
3.
To Delete a User
1.
2.
3.
SECURITY CODES (Continued)
CODE
+
8
(Master Code)
(User Number)
(User's Code)
CODE
+
8
(Master Code)
(User Number)
STOP.
ENTER MASTER CODE THEN PRESS CODE KEY
Example: 7
2
9
ENTER USER NUMBER
Enter the 2-digit User Number (03-16) for the user you
are adding or changing.
ENTER USER'S CODE
Enter the new 4-digit security code for that user.
ENTER MASTER CODE THEN PRESS CODE KEY
Example: 7
2
9
ENTER USER NUMBER
Enter the 2-digit User Number (03–16) for the user whose
code you are deleting.
Wait (about 3 seconds) until the keypad beeps once before
pressing any other key. The code is automatically deleted.
– 26 –
6 then press the CODE key.
6 then press the CODE key.
Advertisement
Table of Contents
