Multi-Line (Ml) Appearances - Panasonic DBS 824 Manual

I

Multi-Line (ML) Appearances

(CPC-S and CPC-M)
Description
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key
See "ML/MC0 Separation" (page 3-54) for information on assigning both
ML and MC0 keys to the same system
Operation
To originate an intercom or trunk call
To place a call on Exclusive Hold (page 3-29)
To place a call on System Hold (page 3-15)
To transfer a call
Related Programming
l
FF2 (Trunks) Pooled Trunk Access for Group "9"
l
FF2 (Trunks) Pooled Trunk Access for Group "8 l-86"
l
FF3 (Extension) Forced Least Cost Routing
l
FF5 (Keys) FF Key Assignment (all)
l
l
Considerations
A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall
l
calls, and call-forward calls
When a CO call or an Intercom Call arrives, a search begins for a Multi-
l
tine key not in use The lower numbered FF keys will be searched first
When a free Multi-Line key is found, the LED flashes green and the
Issued 3/l /95
extension rings
DBS 824-l O-700
I Action
Press an idle MC0 key The key blinks
(green) as the call is made
Press the MC0 key
HOLD
Press the key
dial the destination exten-
PROG
3-53