Panasonic DBS 824 Manual page 397

An Overview of Toll Restrictions
Notes:
Operator Calls Under the old dialing plan, operator calls for TRS types 3-6
are permitted if international calls are permitted system-wide (FF7 l# l# l#)
The Office Code Tables (FM 3#) are used to restrict all 0+ dialing, the next
two digits will also be analyzed (Operator calls are always restricted for TRS
types O-2 - and always allowed for TRS type 7 )
Under the new NANP dialing plan operator calls can be allowed or restricted
on individual extensions (using FF7 l# 17#), as long as the extension uses a
trunk assigned TRS type 2-6 (Operator calls are always restricted for TRS
types 0 and 1 -- and always allowed for TRS type 7 )
Area Codes and OfSice Codes Under either dialing plan outgoing calls on
trunks assigned TRS types 3-6 can be allowed or restricted based on the area
code and/or office code dialed When a number is dialed, the system first
checks arealofice code combinations entered in the "Special Area Code/
Office Code Tables" (FF7 # and 5#) If it doesn't find any restrictions there,
the system then checks the ofice codes assigned to TRS types 2-6 as a group
plan If not (or if the system doesn't find a match), it then checks the
individual area codes and office codes assigned to individual TRS types in
FF7 2# and 3#
International Calling Under the old dialing plan, international calls are
allowed or restricted on a system-wide basis using the TRS type assigned to
the trunk Under the new NANP dialing plan, international calls on trunks
assigned TRS types 3-6 can be allowed or restricted on individual extensions
(FF7 l# lS#) Furthermore these extensions can also be programmed to
allow or restrict individual calls based on the Country Code dialed (FF7 1# l#
and FF7 I# 19#)
7-4
DBS 824-l O-400
FF7
Issued 3/l /95