Panasonic DBS 824 Manual page 155

Least Cost Routing (LCR) Access
Software Version @PC-S and CPC-M, Version 1 0 and higher
Address FFl 2# 1# 3# (0 or l)#
Description
This program specifies whether Least Cost Routing (LCR) is used when "9"
is dialed before making an outside call
Programming
Related Programming
Forced Least Cost Routing
LCR Program Settings
Restriction With Call Forward-Outside Feature LCR will not work with
Notes
the Call Forward-Outside feature If LCR is activated (the above address is
set to "l"), extensions set to Call For%vard-Outside must use trunk groups l-6
(trunk group "9" cannot be used) See
more information
Required Hardware Setting To use LCR, Strap 53 on the CPC card must be
cut See
FCC Registration Different FCC registration numbers are used for the DBS
824, depending on whether LCR is activated
for more information
lssued 3/l /95
FF3 (ExtPort)# 4#
Section
DBS 824-l O-400
Least Cost Routing (LCR) Access
Section 700~Feature Operation
for instructions
See Section 300~Installation
for
Page 1-7