Assembly - Metrologic Voyager MS9500 Series Installation And User Manual

S K
TAND ITS

Assembly

There are two options for assembling the stand. The first option is a self-
supporting stand that can be moved freely about on the countertop. The second
option is used if the stand will be bolted or hard-mounted to the countertop.
Stand Option 1: Self-Supported Stand Kit #46-46128
Step 1
Slide the apron over the stand.
Step 2
Position the stand so that it sits
under the tab on the apron.
Then secure the apron to the
stand using the two M3 x 6 mm
screws and the two #5 washers
provided.
Stand Option 2: Hard-Mount Accessory Kit #46-46351
2.00
2.00
Figure 19.
#8 Wood
Screw
Figure 20.
14
M3 x 6 mm
Step 1
Drill four #39 holes in the countertop.
Step 2
Secure the base to the countertop with
the four #8 wood screws provided.
Base
Apron
Figure 17.
Apron
Tab
Screw
Figure 18.
Stand
Stand
#5 Washer