Metrologic Stratos MS2x20 Series Configuration Addendum page 79

S C
CANNER ONFIGURATION
EAS Bar Codes
EAS Connection
The following codes do not require that the MS2xx0 to be in scale
program mode.
EAS RS232 on Host Port
³ 1 4
*No EAS RS232 on Host Port
³ 1 4
6 1 1 2
6 1 0 2
B C
AR ODES
This bar code allows the EAS RS232 signal
to use the Tx Out and Rx In lines of the
scanner to Host RS232 In connector.
There is no EAS RS232 signal (Tx Out and
Rx In) used on the scanner to Host RS232
In connector.
* Factory Default Setting
74