Metrologic Stratos MS2x20 Series Configuration Addendum page 13

S C
CALE ONFIGURATION
Single or Dual Cable Scale Configuration Bar Codes
Scale Settling Filter Configuration
The following bar codes can be used to configure a Single or
Dual Cable MS2xx0.
If the MS2xx0 is currently in a Dual Cable configuration, temporarily
disconnect the Scale to Host cable prior to configuring the scale.
The MS2xx0 does not need to be in scale service mode.
The Scale Save Data bar code must be scanned last to save the
changed configuration (see page 2).
Scale = Medium Filter
³ 9 9
Scale = Strong Filter
³ 9 9
B
AR
6 0 0 6
6 0 0 7
C
ODES
Medium filter setting for moderate vibration
environments.
Strong filter setting for high vibration
environments.
8