Scale Settling Filter Configuration - Metrologic Stratos MS2x20 Series Configuration Addendum

S C
CALE ONFIGURATION
Single or Dual Cable Scale Configuration Bar Codes

Scale Settling Filter Configuration

The following bar codes can be used to configure a Single or
Dual Cable MS2xx0.
If the MS2xx0 is currently in a Dual Cable configuration, temporarily
disconnect the Scale to Host cable prior to configuring the scale.
The MS2xx0 does not need to be in scale service mode.
The Scale Save Data bar code must be scanned last to save the
changed configuration (see page 2).
The scale's filter setting allows the unit to withstand a certain amount of vibration
from the checkout counter. A stronger filter allows for more vibration to be
absorbed but the weight may take a little longer to settle. Scales are normally
shipped with a loose filter.
* Scale = Loose Filter
³ 9 9
7
B
AR
6 0 0 5
C
ODES
Loose filter setting for low vibration
environments.
* Factory Default Setting