Pin Assignments - Metrologic MS6720 Installation And User Manual

Pin Assignments for the 5-pin DIN and 6-pin mini-DIN MS6720 Hand-
Held Laser Scanner with Built-in PC Keyboard Wedge Interface
The coil cable is terminated with a 5-pin DIN female connector on one end,
and a 6-pin mini DIN male on the other. Metrologic will supply an adaptor
cable with a 5-pin DIN male connector on one end and a 6-pin mini DIN
female connector on the other.
Coil Cable Connectors
5-pin Female 6-pin Male
According to the termination required, connect the appropriate end of the
adaptor cable to the coil cable, leaving the necessary termination exposed for
connecting to the keyboard and the keyboard port on the PC. The pin
assignments are as follows:
5-pin Female DIN
Pin Function
1 Keyboard Clock
2 Keyboard Data
3 No Connect
4 Power Ground
5 +5 Volts DC
5-pin Male DIN
Pin Function
1 PC Clock
2 PC Data
3 No Connect
4 Power Ground
5 +5 Volts DC
36
Adaptor Cable Connectors
6-pin Female 5-pin Male
6-pin Female mini-DIN
Pin Function
1 Keyboard Data
2 No Connect
3 Power Ground
4 +5 Volts DC
5 Keyboard Clock
6 No Connect
6-pin Male mini-DIN
Pin Function
1 PC Data
2 No Connect
3 Power Ground
4 +5 Volts DC
5 PC Clock
6 No Connect