Additional Handsets And Base Stations; Adding A New Handset; Removing A Handset - Topcom Orbit User Manual

Additional handsets and base stations

Set the Common mailbox sub address
If you enter a number already in use, you hear an error beep. Enter a
different number to avoid this.
12 Additional handsets and base stations
You can subscribe up to 5 handsets on a base. Each handset can register up to 4 base
stations and the user can select the base he wants to use.

12.1 Adding a new handset

Only needed when you have deregistered a handset or when you bought a
new one.
To put the base into registration mode:
On the handset:

12.2 Removing a handset

This procedure needs to be carried out on a different handset then the one you want to
remove.
40
1 Enter the menu.
2 Select "Text Messaging".
3 Select "Text Settings".
4 Select "Mailbox Number".
5 Enter the new sub-address and press "Save".
1 Press and hold the paging key on the base for 3 seconds.
During 60 seconds the base is ready to register.
1 If the handset is new "Please Register" is shown. Press "Menu" and
select "Registration".
OR
2 Enter the menu.
3 Select "Registration".
4 Select "Register handset".
5 Select the number of the base to be associated with the handset
(1-4) and confirm.
6 Enter the system PIN (0000 by default) and confirm.
7 Return to standby.
1 Enter the menu.
2 Select "Registration".
3 Select "De-Register".
4 Enter the system PIN (0000 by default) and confirm.
5 Scroll to the handset that needs to be removed and confirm.
6 Press "Yes" to confirm or "No" to cancel.
7 Return to standby.