Unpacking The Stove - Quadra-Fire DV-40 Installation, Operation, Venting And Maintenance Instructions

1. Unbolt pallet using a 7/16" wrench to remove the four bolts from the underside of the pallet.
2. Between the firebox bottom and pallet is an accessories box containing logs, nuggets, touch-up
paint, an allen key, and instructions for installation of legs or pedestal.
DV-40 STEP LEG ADAPTER ASSEMBLY INSTRUCTIONS
1. Remove door from unit and log box located between stove and pallet.
2. Install leg adapter front cover on front of stove as shown (Fig. 1)
3. Remove pallet mounting bolts from underneath pallet and remove stove from pallet.
4 WITH FRONT DOOR REMOVED lay unit down on its front for easy access to bottom. (Fig. 2)
5. Secure leg adapters using 1/4-20 hex head bolts as shown, making sure the bolts are tight.
NOTE: The right and left logs are fastened to the stove. Take special care while laying the stove
down to not jar and fracture the logs.
6. Secure legs onto the leg adapter pieces using bolts supplied making sure to offset leveling legs as
shown.
7. Carefully stand stove up and place in desired location.
8. Use leveling bolts on legs to stabilize
and level stove.
9. Check to insure upper baffle and log
set are in their proper locations.
10. Replace door on stove.

UNPACKING THE STOVE

Fig. 2
Page 7
Leg adapter
cover
Fig. 1
Leg adapters
Leveling leg
Leveling leg