Matrix 2/5; Types Of Start/Stop; Check Digit; Fixed Or Variable Lengths - Metrologic IS1000 Series Configuration Manual

3.13. Matrix 2/5

This is a numeric and a more dense code than the Standard 2/5. Each character is
encoded with three bars and two spaces. It is advised to use it with fixed lengths or with a

check digit.

3.13.1. Types of Start/Stop

WITH 3 BARS *
START
3.13.2. Check Digit
VERIFIED AND TRANSMITTED *
NOT VERIFIED
!
Caution:
The mode Check Digit Not Verified is not advised, missing characters can occur in
case of incomplete scanning of a code.

3.13.3. Fixed or Variable Lengths

VARIABLE *
In case that fixed lengths have been set, go to next page to adjust the number of
characters per length.
START OF CONFIGURATION
IS1000 – Configuration Guide
STOP
41
WITH 2 BARS
START STOP
VERIFIED BUT NOT TRANSMITTED
FIXED
END OF CONFIGURATION