All Vehicles-Shaft Head Unit Provisions - Metra Electronics AW-200GM Installation Instructions Manual

Car kit radio
Table of Contents

Advertisement

Kit Assembly 99-2001, AW-200GM
All vehicles – Shaft head unit provisions
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1. Slide the aftermarket head unit into the
kit from the back and secure with the
shaft nuts provided with the new
head unit.
Note: If an equalizer will be included
slide the unit into the back of the
radio housing and secure. If an
equalizer will NOT be included,snap
the equalizer dummy plate into the
opening in the radio housing
4. Reassemble dash in reverse order
of disassembly.
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

99-2001

Table of Contents