Table of Contents
Advertisement
Dash Disassembly 99-2001, AW-200GM
Hummer H2 2003-2007
1. Open center console and remove (4)
9/32" screws from console box and
remove box. (Figure A)
2. Remove (4) phillips screws from hinge
on console door inside console and
remove door. (Figure B)
3. Loosen (1) T-15 torx on forward facing
side of shift lever and pull up to remove
(Figure C)
4. Unclip cup holder/shifter trim assembly
and remove. (Figure D)
5. Remove (6) Phillips screws from top of
center console.
6. Remove (2) Phillips screws from inside
pocket on back of center console, then
unclip and remove.
Continued on next page
(Figure A)
(Figure B)
(Figure C)
(Figure D)
23
Advertisement
Table of Contents
