Advertisement
DIN HEAD UNIT PROVISION
NOTE: Also refer to the instructions
included with the aftermarket radio.
1
Using a Phillips screw driver remove
the rear support bracket from the
radio housing. (Figure A)
2
Snap the radio housing into the radio
bracket (removed from factory radio)
and replace rear support bracket.
(Figure B)
Slide the DIN cage into the radio
3
housing and secure by bending the
metal locking tabs outward. (Figure C)
4
Slide the radio into the cage/ radio
housing assembly until it snaps into
place. (Figure D)
D
99-9224
3
KIT ASSEMBL Y
A
B
C
Advertisement
