Metra Electronics 99-7337B Installation Instructions Manual page 4

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Attach the ISO brackets to the radio
housing. (Figure A)
2 Slide the head unit into the bracket /
radio housing assembly and secure
using the ISO screws supplied with
the radio. (Figure B)
3 Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
4 Reassemble dash in reverse order of
disassembly.
Continue to final assembly.
99-7337B KIT ASSEMBLY
ISO HEAD UNIT PROVISION
A
B
2