Led Indications - Interlogix ES2402-24P-2C User Manual

■ Fast Ethernet TP interface
10/100BASE-TX Copper, RJ45 Twist-Pair: Up to 100 meters.
■ Gigabit TP Interface
10/100/1000BASE-T Copper, RJ45 Twist-Pair: up to 100 meters.
■ Gigabit SFP Slots
1000BASE-SX/LX mini-GBIC slot, SFP (Small Factor Pluggable) transceiver module: From 550 meters (Multi-mode fiber),
up to 10/20/30/50/60/70 kilometers (Single-mode fiber).
■ Reset Button
On the left side of the front panel, the reset button is designed for rebooting the PoE Web Smart Switch without turning off
and on the power. The following is the summary table of Reset button
Reset Button Pressed and Released
< 5 sec: System Reboot
> 5 sec: Factory Default

2.1.2 LED Indications

Front panel LED indicating is instant status of port links, data activity and system power, and help monitor and troubleshoot
when needed. Figure 2-2
ES2402 SERIES LED Indication
Figure 2-1 ES2402 SERIES front panel
shows the LED indications of these PoE Web Smart Switches.
functions:
Function
Reboot the PoE Web Smart Switch.
Reset the PoE Web Smart Switch to Factory Default
configuration. The PoE Web Smart Switch will then reboot
and load the default settings as shown below:
Default Username: admin

Default Password: admin

Default IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Default Gateway: 192.168.0.254

19